So you’re thinking of setting up an indoor shooting range. Whether you’re building one from the ground up or repurposing an existing space, one of your foremost considerations — way before you even get into the nitty gritty of bullet traps and target systems — should be the structural foundation of your soon-to-be training facility.
We’re talking about the walls, floors, and ceilings of your shooting range, of course — the top-to-bottom barriers that will ensure ballistic security and the overall safety of your users, trainers, and facility staff.
Here are some structural considerations to keep in mind when you’re building an indoor shooting range:
What’s the best wall material for an indoor shooting range?
Your first choice for walls should be poured-in-place or tilt-up panel concrete walls for maximum noise attenuation and ballistic security. Second choice would be concrete blocks filled with cement or grout. Do not use gravel or sand as filling material for concrete blocks, since they can leak onto the range floor if the wall is cracked or breached.
If you will be using an existing structure with inadequate wall material, steel plating can be applied to the side walls downrange.
Why smooth concrete is the safest floor for indoor shooting ranges
A hard, smooth floor is best since it makes for less erratic ricochets. For this reason, non-absorptive hardened concrete is the recommended flooring from the firing line to the bullet trap, since this area will get a lot of low angle impacts.
For the area behind the firing line, vinyl, rubber, or any non-slippery flooring material can be used for shooter comfort and safety.
How to protect ceiling fixtures in an indoor shooting range
When and if feasible, go for a smooth concrete surface — such as slab or precast — on the range side (underside) of the ceiling and route all your lights, plumbing, ducting, and range ventilation on the outside.
If a slab or precast ceiling is out of the question, use a truss ceiling with redirective guards and air-space baffles to protect ceiling fixtures. InVeris Training Solutions can help you with the optimal placements for air-space baffles or redirective guards along with the load weight computations to your range planner as part of our submittal drawing package.
Get a free Indoor Range Design Guide
If you found any of these tips useful, then consider downloading InVeris Training Solutions’ Indoor Range Design Guide — it’s a free, 32-page e-book that covers everything you need to know from planning and design considerations, to choosing your range type, equipment, safety considerations, noise standards, sample range layouts, and more.
March 20, 2023
De-escalation skills are crucial for law enforcement officers to ensure…
February 27, 2023
Are you planning to open a shooting range or thinking…