The LE5000 DCS Dust Collection system captures lead particulates, fragments and dust, reducing the potential exposure to range personnel. The high-power exhaust system maintains a negative pressure in the deceleration chamber and collection area.
The exhaust system also acts as a dust collection system, terminating in multiple stages of filtration with HEPA final, to ensure dust containment and collection. The filter banks are automatically cleaned with a measured air pulse when the pressure drop across the filters reaches a preset level, ensuring long filter life and maximum effectiveness. The system lets the lead particles leave the bullet trap via the supplied sealed container or the final HEPA filters for safe disposal, minimizing dangerous handling.
The LE5000 particle conveyance system is typically a belttype conveyor assembly designed to continuously move the lead to a centrally located sealed containers, reducing the exposure of range personnel to the hazards of lead and lead dust. The lead dust and particles are stored in DOT approved sealed containers. InVeris incorporates a specialized conveyor system which continuously ‘mines’ the spent bullets, fragments and dust, moving them to a central collection point.
The automatic lead collection system will be a screw conveyor which attaches directly to the bullet trap deceleration chamber. The auger has a 2 7/16” shaft with close clearance screw construction with a 5HP 20RPM beltless drive package. The U-trough auger housing can be opened / removed in 10 ft long sections as required for service/repair and long-term sustainment. Lead collection system includes a screw-type (auger) conveyor and sealed collection drum in lieu of the manual buckets. The conveyor has 6” diameter screw conveyor with 2 7/16” shafts and close clearance screw, sealed in a U-trough enclosure running the full width of each of the bullet traps. The conveyor empties into a sealed storage/transport drum located outside the range or designated area behind the trap.
